Description
JMS Automation is the dealer of Stepper drive in Coimbatore. For details contact +91 82709 02623.
SEA2M44
Features
- High performance, low noise, affordable price, high speed and torque, excellent stability
- Single / dual pulse input
- 16 selections of uniform angle and constant torque subdivisions, the max resolution up to 40000 steps/rev
- Adoption of 4-wires-control circuit greatly reduces noise and increases the rotation stability
- The max response frequency up to 300KHz
- Once the pulse stops for more than 100ms, the coil current will be halved automatically, to prevent the overheating
- Bipolar constant current chopper control improves the output speed and power of the motor
- Photoelectric-isolated signal I / O
- Current range:0.1A~4.5A
- Single power input, voltage range: DC12~40V( the optimal voltage is DC36V )
- Signal source voltage: DC3.3~28V
- Error protection:A Open phase protection Overheating A Overcurrent Low voltage
- Size:117mmx75.7mmx33mm, Net weight:0.27kg
Description
SEA2M44 is a microstep motor driver with uniform angle and constant torque subdivisions, voltage range is DC12V~40V ( the optimal voltage is DC36V ), single power supply. It matches 2 phase hybrid stepper motors which rated current under 4.5A, external diameter 56m m~60mm, and outlets 4, 6 or 8outlets.
Bipolar constant current chopper control makes the motor run smoothly with lower noise and higher stability; The increase of the voltage greatly improves the drive capability and speed. The coil current will be halved automatically onece the pulse stops for more than 100ms, it reduces the heat of driver by 50%, reduces the heat of motor as well. Users can choose low speed high subdivision which up to 40000 steps / rev, it improves the precision, reduces the vibration and noise.
Applications
Carpentry engracing machine, Laser engraving machine, Labelling machine, Die bonder, Inkjrt printer, Embroiderer, Dispenser, BGA repair machine, Laminating machine Wire-stripping machine, Winding machine, Hot-press machine, PCB drilling machine, Non-standard equipment, XYZ gauge, Connctors assemble machine, Medical equipments, Semiconductor Equipment, Blast furnace, etc.
Running Current Setting
|
Im (A)
|
1.0
|
1.1
|
1.3
|
1.5
|
1.8
|
2.0
|
2.3
|
2.5
|
2.8
|
3.0
|
3.2
|
3.5
|
3.8
|
4.0
|
4.2
|
4.5
|
|
D1
|
OFF
|
ON
|
OFF
|
OFF
|
OFF
|
ON
|
OFF
|
ON
|
OFF
|
ON
|
OFF
|
ON
|
OFF
|
ON
|
ON
|
ON
|
|
D2
|
OFF
|
OFF
|
ON
|
OFF
|
OFF
|
ON
|
OFF
|
ON
|
ON
|
OFF
|
ON
|
OFF
|
ON
|
OFF
|
ON
|
ON
|
|
D3
|
OFF
|
OFF
|
OFF
|
ON
|
OFF
|
OFF
|
ON
|
ON
|
ON
|
ON
|
OFF
|
OFF
|
ON
|
ON
|
OFF
|
ON
|
|
D4
|
OFF
|
OFF
|
OFF
|
OFF
|
ON
|
OFF
|
ON
|
OFF
|
ON
|
OFF
|
ON
|
ON
|
OFF
|
ON
|
ON
|
ON
|
Microstep Setting List
|
Pulse/rev
|
200
|
400
|
800
|
1000
|
1600
|
2000
|
3200
|
4000
|
5000
|
6400
|
8000
|
10000
|
12800
|
20000
|
25600
|
40000
|
|
D5
|
ON
|
OFF
|
ON
|
ON
|
ON
|
OFF
|
ON
|
OFF
|
ON
|
OFF
|
ON
|
OFF
|
ON
|
OFF
|
OFF
|
OFF
|
|
D6
|
ON
|
ON
|
OFF
|
ON
|
ON
|
OFF
|
ON
|
OFF
|
OFF
|
ON
|
OFF
|
ON
|
OFF
|
ON
|
OFF
|
OFF
|
|
D7
|
ON
|
ON
|
ON
|
OFF
|
ON
|
ON
|
OFF
|
OFF
|
OFF
|
OFF
|
ON
|
ON
|
OFF
|
OFF
|
ON
|
OFF
|
|
D8
|
ON
|
ON
|
ON
|
ON
|
OFF
|
ON
|
OFF
|
ON
|
OFF
|
ON
|
OFF
|
OFF
|
ON
|
OFF
|
OFF
|
OFF
|
|
D9
|
ON: Double Pulse, PU is Clockwise pulse, DR is Counter Clockwise stepper pulse signal. OFF: Single Pulse, PU is pulse signal, DR is Direction control stepper signal.
Self detect switch (OFF: accept external pulse signal; ON: driver internal send 7.5kHz pulse, rotate speed can be controlled by
D5~D8.
|
|
D10
|
Installation dimensions
Driver Connection
Pin Functions
|
Mark
|
Function
|
Instruction
Power on, the green indicator normally on.
Overcurrent, phase open circuit, overtension, low voltage, the red indicator flashes.
|
|
POWER
|
Power indicator
|
|
O.H
|
Fault indecator
|
|
MF-
|
Motor free signal
|
When the low electrical level is valid, it cuts off the motor current, the driver stops working and motor will be in a free state.
|
|
MF+
|
Input signal positive side
|
Connects +3.3V~+28V pulse signal power.
|
|
DR-
|
Direction control signal
|
For changing the direction,input resistance is 220 Ω. Requires: low level +0V~
+0.5V, high level+4V~+5V, pulse width >2.5 μs
|
|
DR+
|
Input signal positive side
|
Connects +3.3V~+28V pulse signal power.
|
|
PU-
|
Pulse signal
|
When the falling edge is valid, the motor moves a step as the pulse become lower, input resistance is 220Ω. Requires: low level +0V~+0.5V, high level +4V
~+5V, pulse width >2.5 μs.
|
|
PU+
|
Input signal positive side
|
Connects +3.3V~+28V pulse signal power.
|
|
+V
|
Power+
|
DC12~40V ( the optimal voltage is DC36V )
|
|
-V
|
Power-
|
|
-B¸+B
|
Connect to the motor
|
Please refer to the motor connections.
|
Alarm functions
- 1 Green 1 Red Alternately flashes,Overcurrent;
- 1 Green 2 Red Alternately flashes,Phase open circuit;
- 1 Green 3 Red Alternately flashes,Overvoltage;
- 1 Green 4 Red Alternately flashes, Low voltage;
- 1 Green 5 Red Alternately flashes,Other faults;
The driver will lose self-locking function when the above alarms start,please clear faults and re-up electricity,the driver goes back to normal when the power green indicator normally on.
?Attention:The driver can't be protective when connects the wire inversely or wrong,please confirm the connections before electrify it,otherwise the fuse inside may be burnout.
SEA2M60M
Features
- High performance, low noise, affordable price, high speed and torque, excellent stability
- Single / dual pulse input
- 16 selections of uniform angle and constant torque subdivisions, the max resolution up to 40000 steps/rev
- Adoption of 4-wires-control circuit greatly reduces noise and increases the rotation stability
- The max response frequency up to 300KHz
- Once the pulse stops for more than 100ms, the coil current will be halved automatically, to prevent the overheating
- Bipolar constant current chopper control improves the output speed and power of the motor
- Photoelectric-isolated signal I / O
- Current range:0.1A~6.5A
- Single power input, voltage range: AC16~90V( the optimal voltage is AC60V )
- Signal source voltage: DC3.3~28V
- Error protection:A Open phase protection Overheating A Overcurrent Low voltage
- Size:117mmx75.7mmx33mm, Net weight:0.27kg
Applications
Carpentry engracing machine, Laser engraving machine, Labelling machine, Die bonder, Inkjrt printer, Embroiderer, Dispenser, BGA repair machine, Laminating machine Wire-stripping machine, Winding machine, Hot-press machine, PCB drilling machine, Non-standard equipment, XYZ gauge, Connctors assemble machine, Medical equipments, Semiconductor Equipment, Blast furnace, etc.
-
Running Current Setting
-
|
Im (A)
|
2.8
|
3.0
|
3.2
|
3.5
|
3.8
|
4.0
|
4.2
|
4.5
|
4.8
|
5.0
|
5.2
|
5.5
|
5.8
|
6.0
|
6.2
|
6.5
|
|
D1
|
OFF
|
ON
|
OFF
|
OFF
|
OFF
|
ON
|
OFF
|
ON
|
OFF
|
ON
|
OFF
|
ON
|
OFF
|
ON
|
ON
|
ON
|
|
D2
|
OFF
|
OFF
|
ON
|
OFF
|
OFF
|
ON
|
OFF
|
ON
|
ON
|
OFF
|
ON
|
OFF
|
ON
|
OFF
|
ON
|
ON
|
|
D3
|
OFF
|
OFF
|
OFF
|
ON
|
OFF
|
OFF
|
ON
|
ON
|
ON
|
ON
|
OFF
|
OFF
|
ON
|
ON
|
OFF
|
ON
|
|
D4
|
OFF
|
OFF
|
OFF
|
OFF
|
ON
|
OFF
|
ON
|
OFF
|
ON
|
OFF
|
ON
|
ON
|
OFF
|
ON
|
ON
|
ON
|
Microstep Setting List
-
|
Pulse/rev
|
200
|
400
|
800
|
1000
|
1600
|
2000
|
3200
|
4000
|
5000
|
6400
|
8000
|
10000
|
12800
|
20000
|
25600
|
40000
|
|
D5
|
ON
|
OFF
|
ON
|
ON
|
ON
|
OFF
|
ON
|
OFF
|
ON
|
OFF
|
ON
|
OFF
|
ON
|
OFF
|
OFF
|
OFF
|
|
D6
|
ON
|
ON
|
OFF
|
ON
|
ON
|
OFF
|
ON
|
OFF
|
OFF
|
ON
|
OFF
|
ON
|
OFF
|
ON
|
OFF
|
OFF
|
|
D7
|
ON
|
ON
|
ON
|
OFF
|
ON
|
ON
|
OFF
|
OFF
|
OFF
|
OFF
|
ON
|
ON
|
OFF
|
OFF
|
ON
|
OFF
|
|
D8
|
ON
|
ON
|
ON
|
ON
|
OFF
|
ON
|
OFF
|
ON
|
OFF
|
ON
|
OFF
|
OFF
|
ON
|
OFF
|
OFF
|
OFF
|
|
D9
|
ON: Double Pulse, PU is Clockwise pulse, DR is Counter Clockwise stepper pulse signal. OFF: Single Pulse, PU is pulse signal, DR is Direction control stepper signal.
Self detect switch (OFF: accept external pulse signal; ON: driver internal send 7.5kHz pulse, rotate speed can be controlled by
D5~D8.
|
|
D10
|
Installation dimensions Driver Connection
-
-
Pin Functions
-
|
Mark
|
Function
|
Instruction
Power on, the green indicator normally on.
Overcurrent, phase open circuit, overtension, low voltage, the red indicator flashes.
|
|
POWER
|
Power indicator
|
|
O.H
|
Fault indecator
|
|
PU+
|
Input signal positive side
|
Connects +3.3V~+28V pulse signal power.
|
|
PU-
|
Pulse signal
|
When the falling edge is valid, the motor moves a step as the pulse become lower, input resistance is 220Ω. Requires: low level +0V~+0.5V, high level +4V
~+5V, pulse width >2.5 μs.
|
|
DR+
|
Input signal positive side
|
Connects +3.3V~+28V pulse signal power.
|
|
DR-
|
Direction control signal
|
For changing the direction,input resistance is 220 Ω. Requires: low level +0V~
+0.5V, high level+4V~+5V, pulse width >2.5 μs
|
|
MF+
|
Input signal positive side
|
Connects +3.3V~+28V pulse signal power.
|
|
MF-
|
Motor free signal
|
When the low electrical level is valid, it cuts off the motor current, the driver stops working and motor will be in a free state.
|
|
+V
|
Power+
|
AC16~90V ( the optimal voltage is AC60V )
|
|
-V
|
Power-
|
|
-B¸+B
|
Connect to the motor
|
Please refer to the motor connections.
|
Alarm functions
- 1 Green 1 Red Alternately flashes,Overcurrent;
- 1 Green 2 Red Alternately flashes,Phase open circuit;
- 1 Green 3 Red Alternately flashes,Overvoltage;
- 1 Green 4 Red Alternately flashes, Low voltage;
- 1 Green 5 Red Alternately flashes,Other faults;
-
The driver will lose self-locking function when the above alarms start,please clear faults and re-up electricity,the driver goes back to normal when the power green indicator normally on.
?Attention:The driver can't be protective when connects the wire inversely or wrong,please confirm the connections before electrify it,otherwise the fuse inside may be burnout.
